HP48G
- Starting the BC Program
Reviewed:
July 13, 1998
Overview
While
working with the HP48G Body Composition calculator you may
notice the program terminate and return the the calculator’s
native mode. This is usually indicated by the following screen.
The buttons on the menu bar may contain various characters.
|
{
HOME }
-----------------------------------------------
4:
3:
2:
1:
|
|
This
can occur if the [ON] button is pressed while the Body Composition
program is running, or if invalid data is entered into the
program.
Follow
these steps
Use
the following steps to recall the Body Composition program
and begin entering body composition data again
- Press
[ON][C]. You will see the same screen as above with the
following menu bar across the bottom of the screen:
|
VECTR
|
MAT
|
LIST
|
HYP
|
REAL
|
BASE
|
- Press
[CST]. You will see the following menu bar on the bottom
of the screen:
*Note:
If you see a blank menu bar on the screen, the Body Composition
program is no longer stored in memory and the calculator must
be returned to BIO|ANALOGICS for reprogramming. Call (800) 327-7953
for a Return Authorization Number and shipping instructions.
- Press
[A], corresponding to the letters BC (for Body Composition)
on the screen.
You
should now see the BIO|ANALOGICS beginning screen. Press [ENTER]
to begin entering body composition data.
Related
Files
Word (.doc) version
|
